ZMODO 8CH Especificações

1

Product Introduction 2.6 General Application Support Remote configuration, video browsing, local recording, local and remote playback Motion Detection

Product Introduction 2.7 2.4 Package Contents Before proceeding with any setup procedures, please make sure that your package includes the followin

Product Introduction 2.8 2.5 Getting Familiar with your DVR Main Functions & Features Live Remote Viewing Access your DVR remotely from anyw

Product Introduction 2.9 Rear Panel

Product Introduction 2.10 Mouse

First-time Setup 3.1 First-time Setup 3 3.1 DVR Installation HDD Installation IMPORTANT: Your system will not be preinstalled with a hard disk

First-time Setup 3.2 1. Make sure your DVR is unplugged from its power source and slide the top panel off of the DVR. 2. Connect the SATA power an

First-time Setup 3.3 3. Once connected, place the HDD into the DVR with the cables placed as shown. IMPORTANT: Make sure that the cables do not come

First-time Setup 3.4 5. Slide the DVR panel back on and locate the 7 black Phillips screws (found in kit). Apply the screws in the three holes on the

First-time Setup 3.5 7. The system will begin formatting the HDD, and will automatically reboot once the formatting is complete. Connecting your D

2

First-time Setup 3.6 Connecting the Display This DVR can support up to three different display options: HDMI, VGA and BNC. The following steps prov

First-time Setup 3.7 1. On the output BNC connectors on the rear panel of your DVR, you will see two protrusions (one on each side of the connector).

First-time Setup 3.8 Connecting an External Alarm NOTE: A large portion of the installation of an alarm will vary based on the type of alarm. Becaus

First-time Setup 3.9 Connecting the cameras to the DVR 1. Connect the power adapter to the outlets. Connect the camera power adapter to a power ou

First-time Setup 3.10 Connecting a PTZ Camera 1. Locate the RS-485 connectors on the back panel of your DVR. 2. Locate the positive wire on your PTZ

First-time Setup 3.11 bottom of the camera. Rotate until the camera is securely attached to the mounting bracket. 6. Mount the camera to the wall.

First-time Setup 3.12 Startup Guide Explained Network Time Protocol: When enabled, the DVR system will automatically set the date and time settings t

First-time Setup 3.13 3.4 Home Screen Introduction The home screen is the main screen of your DVR, displaying the live-video stream from the connect

First-time Setup 3.14 Event Notification When your cameras have detected an event (see 4.1 Main Menu Detailed – Event Management) a notification wil

4.1 Using the DVR 4 4.1 Main Menu Detailed Use the main menu to access all of the full features of the DVR. The following chapter will explai

3 ! Before using this product... ... 1.1!11.1! Understanding the manual ...

4.2 The system can support up to 16 accounts, with two different account types: Administrator: Has full access to all features of the DVR and full

4.3 System Log The DVR will provide notifications when certain events occur. Such events could be, but are not limited to: a missing hard drive or

4.4 Disk Drive Info This menu allows you to review important HDD information, format HDD's and change it's settings. Hard Disk Drive

4.5 PTZ Settings Channel Select the channel that your PTZ camera is connected to. Protocol Refers to the language of communication between you

4.6 System Settings Use this menu to view and change basic settings and information of the DVR. From this menu, you may enable the startup guide,

4.7 Help&FAQ Funlux offers comprehensive support for our users. This page provides links to some of our resources that will help guide you to

4.8 Video Settings Display Settings The DVR offers several options to best customize the content displayed on the home-screen of your DVR. Ch

4.9 Video Stream Settings Adjusts the video quality, frame rate, resolution and streaming bit rate Channel Choose the channel that you would lik

4.10 Video Mask The DVR allows you to mask / hide certain areas of your camera feed from recording and monitoring. To create an area to mask you

4.11 Network Settings Basic Settings Selecting DHCP will allow the DVR to manually configure the IP address and network parameters. The setting

4 ! Using the DVR ... 4.1!44.1! Main Menu Detailed ...

4.12 DDNS NOTE: For advanced users only. Router port-forwarding is required. Use this page to set up a DDNS (Dynamic DNS Server) for remote surve

4.13 NOTE: The UPNP settings for the device are not the same as the UPNP settings on your router and do not pose the same security risks. NOTE*

4.14 The intelligent recording profile will automatically manage the recording to optimize storage capacity. During scenes of interest when "

4.15 IMPORTANT: When changing the settings on a channel, press [Save] before editing another channel or exiting the page otherwise all changes will

4.16 f. "Send E-mail" The DVR will send an email notification. The DVR comes with predefined server settings for common service providers

4.17 1. Choose an alarm to edit. In the dropdown menu, choose an alarm and select [On] to enable the alarm input. Choose the type (normally open o

4.18 Video Loss The camera's video could be lost due to various reasons, and the potential consequences could be serious. Use this menu to cu

4.19 c. "Alarm Output" The DVR will activate any external alarms that have been connected to the back panel (see: 3.1 DVR Installation – C

4.20 Image Orientation Change the image orientation. "Flip" will flip the image vertically, "Mirror" will flip the image hor

4.21 Snapshot You can quickly capture a snapshot at any time; in order to do so, click once on the [Snapshot] button in the camera functions bar.

Product Introduction 1.1 Before using this product... 1 1.1 Understanding the manual How this manual is organized This manual is specifically

4.22 Playback Access and review your surveillance footage from this menu. Video Playback 1. Select the channel of your recording on the righ

4.23 PTZ Control These control settings can only be used for cameras that have pan, tilt and/or zoom features (PTZ). Directional Arrows Move

4.24 Select Patrol Line Choose the preset patrol path for the camera to follow. Select Preset Select a preset location, and press OK to move the ca

4.25 4.3 Remote-viewing Setup Remote viewing allows you to access your DVR from any location in the world for unprecedented surveillance versatil

4.26 1. Locate the DVR information on the outer casing of your system. 2. Connect your mobile device to the same local network as your DVR. Plea

4.27 4. Add a new device to your account. Once you have logged in, you will enter a 'Device List' page. Tap the [+] on the upper right

4.28 6. Name your device. When the device has been successfully added, you will be automatically prompted to name your device. Choose any unique

4.29 8. Disconnect from your wireless network and access the DVR using 3G/4G. Connect your mobile device to a different internet connection from y

4.30 4.4 Updating your DVR From your Mobile Device (via Zsight) Please refer to the following instructions to upgrade the firmware of your DVR fro

5.31 Support 5 5.1 Troubleshooting Most problems encountered are common problems and are easily correctible. For your convenience, please ref

Product Introduction 1.2 • Chapter 4 Using the DVR The DVR's full features can be utilized through the new and revolutionary user-friendly menu

5.32 The system beeps at startup For some versions of the DVR firmware, this beeping will be normal. There is no issue with your system. The syste

5.33 5.2 Warranty & RMA Please visit http://www.zmodo.com/rma for complete information. General Guidelines To qualify for a Return Merchandi

5.34 Requesting this option implies that the customer has the defective part and will ship it back to Funlux within 25 calendar days of the ship dat

5.35 If the returned item(s) are tested and found to be non-defective by the certified Funlux RMA technicians, the customer will not be reimbursed b

5.36 disassembly, repair, or modification. This limited warranty also does not apply to any product on which the original product label and or UPC i

5.37 5.3 Funlux Support Online Resources For full instructional manuals, software downloads, and more, please visit: http://www.zmodo.com/suppo

Product Introduction 1.3 1.2 Safety Precautions Please read and follow these instructions for your safety while operating and setting up the equipm

Product Introduction 2.4 Product Introduction 2 2.1 Product Overview This Funlux DVR system is specially designed to safeguard your home or busi

Product Introduction 2.5 2.2 Technical Specifications DVR (ZMD-DX-SAN8) Video Input (Analog) 8 channel BNC Video Output HDMI x1 (1920x1080@60Hz)